Automotive Conveyor Chain
Flat top chain for final assembly slat conveyors that carry the vehicle and the crew, and CC-5 roller chain for parts, glass and casting lines. Built to OEM spec, to your print, or reverse engineered from the part in your hand.
Chain we build for automotive
Flat Top Conveyor ChainBolted or welded flat top that carries light to heavy weights. 2.609″ to over 24″ pitch, single, double or triple strand.View
CC-5 A/B Roller Conveyor ChainOne of the strongest roller chains we build. 6″ pitch with high sidebar, steel or UHMW rollers.View
Sprockets, Shafts, Pillow Blocks & Take-UpsStandard, compensator or skip tooth sprockets in heat treated carbon or stainless steel.View
Conveyor Wheels1½″ to over 8″ in cast, steel, stainless, UHMW, bronze or nylon, with the bearing you need.View
Replacement & Special PartsDogs, bolts, pans, buckets, belts and brackets for any OEM’s conveyor, or reverse engineered from your sample.View
Built to spec, or from a sample
Chain from a conveyor builder that is gone, a part with no drawing, or a line nobody else will quote: send it to us.
- Send what you haveAn OEM part number, your print, a worn sample, or a few measurements and a photo.
- We engineer and quoteOur engineers match it or reverse engineer it, then quote it with the material, rollers and attachments spelled out.
- We build and shipDesigned, machined, welded and assembled in Traverse City, Michigan.
Flat top chain options
- Strands
- Single, double or triple
- Width
- 4 inches to over 16 feet
- Top plates
- Stainless or carbon steel, 3/16″ to 5/8″ thick, reinforced or not
- Finishes
- Non-skid, painted, hot dip galvanized or zinc plated
- Wheel cleats
- Wheel cleats or wells available
- Rollers
- 3″ to over 6″ diameter. Flat face, single flange, double flange or Vee
- Roller material
- Carbon, stainless steels, UHMW, nylon, urethane, bronze or other
- Bearings
- Steel plain bushing, plastic wear bushing, needle bearing or ball bearing
CC-5 chain options
- Pitch
- 6″ with high sidebar
- Attachments
- Side guides, top plates, raised rollers and welded attachments
- Rollers
- Steel, UHMW or a combination
Running overhead or power and free conveyors in your plant? Frost Inc., part of the Frost Family of Companies, builds the overhead conveyor chain and trolleys.
Frost Inc. automotiveQuestions we hear
Can you match the chain we run now?
Yes. We build chain and parts to OEM specifications, regardless of who built the original conveyor. If you do not know who made your chain, send a sample, a drawing or a few measurements and we can reverse engineer it.
Do you make the sprockets and wheels too?
Yes. We make sprockets with standard, compensator or skip tooth profiles, plus shafts, pillow blocks, take-ups and wheels from 1½″ to over 8″. If your chain still has life left, we can supply just the components you need.
What do you need to quote it?
- The chain type or part number
- Pitch, and chain width or number of strands
- Attachments, rollers and material
- The length you need
- A photo, a drawing or the OEM name
Send it through our quote form or call 800.791.1409.
Get Started
Discuss your project with our experienced Sales and Engineering staff.